MOTORS
Motors are totally enclose fan cooled (TEFC). Hazardous location motors are available upon request. These motors will have the mag. starters and timers but they will not be mounted on the machine.  The buyer must mount the switches on the wall at the distance allowed by OSHA or their insurance company.  If the buyer wants the switches mounted on the machines, we must have it in writing that that they understand that these machines are not to be set in a location where hazardous fumes are present.

RECEPTACLES
Receptacles are only standard on the 3646BG single phase machine. They may be ordered for the other machines. On any three-phase machines, single-phase power must be brought to machines for the receptacles. If you feel that receptacles are important for your machine, figure the location for them and have the receptacles installed at the factory. 

CASTERS
Casters are standard on the 3646BG table. Casters may be installed on the other machines but they will alter the height some. Casters must be installed at the factory; they are not an after market item. 

WORK SURFACE
Work surface is standard 1” grate 35 lbs. per square foot. Heavier grate and fiberglass grate is available if needed. A removable rubber pad for the steel grate is also available for protecting polished products. 

EXHAUST CHIMNEY
The chimneys on DENRAY’s machines are located on the end of the machine and are a standard feature on models 9600BG and 7200BG.  Without a chimney the exhaust may be too much air for the surrounding environment. Chimneys are optional on the 2872BG and the 3644BG tables. 

WATER PANS
Water pans force the grit and sparks to cross the water before entering flame retardant filters. This system will help prevent any hot slag from entering the filter compartment. It would also be a great asset when plasma cutting.  

CENTRAL SYSTEM UNITS
Although DENRAY’s main focus is on self-contained units we also build, on special order, non-motorized units for central systems. These units are built to meet your needs. They contain inside deflectors to prevent the majority of the grit and sparks from entering the vacuum system. Water pans are available as an option. 

SPARK SHIELDS
The table is provided with a 20” tall shield around the work area. These shields are hinged and removable to accommodate larger or longer work pieces. These are designed to increase the efficiency of the table and to protect co-workers, bystanders, and the work area.  These may also be altered to fit the users needs

Informative video available upon request